Connectors And Fittings For Padel Courts

The connection fittings for padel courts are hardware components designed to securely attach tempered glass panels to the court's structure (frames, posts, or other glass panels) while ensuring stability, safety, and durability.

Acrylic connector for padel Couts

• Small size rectangular connector

Size: 160x50x10mm, Weight: 87g, Slot size: 20x8.5mm (M8 bolt) ; 20x10.5mm (M10 bolt); Slot distance: 120mm (suitable for distance of hole center to glass edge about 58mm)

• Bigger size oval connector

Size: 213x80x10mm; Weight: 176g; Slot size: 18x12mm (M10 bolts)

Slot distance: 133mm (suitable for distance of hole center to glass edge 64mm)

• 90 Degree Connector

Size:L140x W140x T10mm; Slot size 60x10.5mm ( for M10 bolt)

60x8.5mm (for M8 bolt); For glass thickness 10–12 mm; 

N.W. 226g/unit

Screw fastener Kit M8-30mm (5 parts)

Including:

1 x M8-30mm bolt,  

1x cap nut,

1 x SS304 flat washer,

1 x spring washer,

1 x white conical polyamide gasket

(see the right picture)

 

• used for 10mm/12mm padel court glass with countersunk hole 18/30mm or 20/30mm

• material: SS304 except for conical polyamide gasket

• N.W. ~29g/set

Screw fastener Kit M8-30mm (5 parts)

Including:

1 x M8-30mm bolt,

1x cap nut, 1 x SS304 flat washer,

1 x spring washer, 1 x black conical polyamide gasket (see the right picture)

 

• used for 10mm/12mm padel court glass with countersunk hole 18/30mm or 20/30mm;

• material: SS304 except for conical polyamide gasket

• N.W. ~29g/set

 

Structural Frame Connectors

These are the backbone of any padel court enclosure:

Corner joints (3-way and 4-way) - Connect vertical posts with horizontal rails at the corners of the court, ensuring rigidity at the most stress-prone points.

T-connectors - Used at mid-span intersections of the perimeter frame, particularly where intermediate horizontal rails meet vertical uprights.

Cross connectors - Applied where internal bracing members intersect, common in the back-wall framing.

Tube clamps/pipe clamps - Secure tubular steel sections together, often used in modular court systems for easy assembly and disassembly.

Glass Panel Fittings

Padel courts feature large tempered glass panels (typically 10–12 mm thick) that require specialized hardware:

Glass clamps/spider fittings - Point-fix systems that grip the glass panel at its edges or face without requiring a full frame, maintaining a clean aesthetic.

U-channel profiles - Aluminum or steel channels that hold the base and sides of glass panels firmly within the steel frame.

Rubber gaskets and neoprene pads - Placed between glass and metal to absorb vibration, prevent chipping, and allow for thermal expansion.

Silicone sealant joints - Used at glass-to-glass and glass-to-metal interfaces to weatherproof the panels and reduce rattling.

Contact us to get a free quote and catalogue!

Hot Tags: connectors and fittings for padel courts, China connectors and fittings for padel courts manufacturers, suppliers, factory, best artificial putting green, best quality artificial grass, artificial grass preparation, outdoor putting green installation, premium artificial turf, v mesh wire